MONITORING

Configuring the Domino SNMP Agent for Solaris
Follow the steps below, once per platform, to configure the IBM® Lotus® Domino™ SNMP Agent for Solaris.

Note Before using the Domino SNMP Agent, ensure that TCP/IP and SNMP are properly installed and configured on the server. To use the NET-SNMP Master Agent provided, refer to Using NET-SNMP with the Domino SNMP Agent. Otherwise, verify that your Master SNMP Agent supports the SMUX protocol, per RFC 1227. Ensure that the Domino executable and the Domino data directories are in your search path.

Tip If you are using the NET-SNMP Master Agent provided, the trap destinations and community names are configured in the /etc/net-snmpd.conf file. Otherwise, refer to the documentation for the master agent technology you are using. Configure appropriate trap destinations and community names for your remote management infrastructure.

Note The Domino SNMP Agent is set up to run automatically. Once the Domino SNMP Agent is configured, it is virtually always running, even when Domino is not. If you later upgrade Domino, stop the LNSNMP process, before beginning the upgrade process.

Note Execute the following commands as the root user.

1. Stop the LNSNMP process. Enter this command:


2. Stop the Master SNMP Agent. If you’re using the NET-SNMP Master Agent provided, enter this command:
3. Configure the Master SNMP Agent to accept LNSNMP as an SMUX peer. If you are using the NET-SNMP Master Agent provided, this has already been done. Otherwise, refer to your Master SNMP Agent’s documentation. The three parameters associated with SMUX authentication for LNSNMP are:
4. Start the Master SNMP Agent. If you’re using the NET-SNMP Master Agent provided, enter this command:
5. Start the LNSNMP process. Enter this command:
6. Create a link to the LNSNMP script. Enter this command, changing the Domino executable path if necessary:
7. Arrange for LNSNMP to be restarted after a reboot. Enter these commands:
You have completed the Solaris-specific portion of the Domino SNMP Agent configuration. Follow the instructions found in Completing the Configuration of the Domino SNMP Agent.

See also